Z(H)LB Series Vertical Axial-(Mixed)-Flow Pump

Features and benefits

Wide range of high efficacy

Stable performance

Good vapor erosion resistance

Hydraulic projects, Water supply

Farmland irrigation

Drainage of cities and water allocation engineering

Industrial water transportation

Flow: 83~48888m3/h

Head: 1~30.6m

Power: 4~2000kw

Voltage: 380V,400V,415V, 6kv, 10kv

1. Installation mode 

A. Single foundation: Pump and motor are installed on the same foundation with outlet above or below the foundation. 

B. Double foundation: Pump and motor are installed respectively on their own foundations with outlet between these two foundations. 

2. Pump can be classified into three types: Non-pullout, pullout and rotor type (with diffuser). 

3. Pump impeller is classified into integral impeller and combined impeller. 

4. The axial thrust of pump is borne by the anti-thrust bearing of motor or the thrust bearing of pump. 

5. The pump bearing is rubber guide bearing (anti-abrasive, anti-corrosive and anti-seawater) and Thordon bearing. The pump shaft is usually equipped with protective tube in which clean pressure water will lubricate and clean the guide bearing. The flow of pressure water is controlled by capacity-relay to avoid damage to the bearing. When pump is used to deliver sewage or water with particles, the automatic-stall shaft seal device at the end of guide bearing in diffuser will prevent liquid entering the bearing after the stall. 

6. Besides adopting anti-corrosive materials, the pump for delivering seawater is equipped with sacrificial anode and exterior power cathodal protection devices to prevent the pump parts from electrochemical corrosion. 

7. The pump is driven by the motor through rigidity or flexible coupling. 

8. There are two types of inlet: The usual bell-mouthed type and the modified ellipse frusta type. 

Note: Materials of pump parts can be selected according to the features of pumping liquids. 

This type of bearing and seal can be adapted according to customers' requirement.

BROTHER digit-control machine tools, borer, broacher, vertical lathe and large special test center run through the production flow line. Without excellent production equipments, there would not be excellent products. 

Shanghai Pacific Pump strictly follows ISO 9001 quality control system, ISO 4001, OHSAS 18000etc. management systems and the scientific and reasonable flow of operation, making sure of a high effective high quality production process.