Products
Pacific Pump Group —
PRODUCTS
Contact Us
Add:No.25,Lane 7488,Hutai Road,Shanghai,China.
Tel:+86-21-5653 1900
Cell Phone: +86-13501896165
Fax:+86-21-3997 1375
Email:info@pacificpumpgroup.com
Self-priming Fire Pump
Horizontal Self-priming Fire Fighting Pump
This pump is a self- priming centrifugal pump. It can be used in Fire fighting, Agriculture Irrigation Machinery and it can also transfer water from river or well. For different irrigation project, the Max. flow rate of our pump can be reached at 1275 m3/h (Model JT-12 ), and it suitable for spary irrigation, drip irrigation and flood irrigation.
THE SPECIFICATION OF SELF PRIMING CENTRIFUGAL WATER PUMP |
|
Model |
JT-6 |
Inlet and Outlet Diameter |
6inch |
Flow Rate |
20-330 m3/h |
Head |
2-34 m |
Max. Suction Lift |
7.6 m |
Max. Solids |
76.2 mm |
Speed |
650-1550 rpm |
Power |
1-40 HP |
Material |
Cast iron, Stainless steel 304/316/316L |
Fuel |
Diesel engine, gas engine or electric motor |
Application |
Sewage, agriculture irrigation, firefighting, drainage, chemical, oil and other fields. |
Accessories |
2 or 4 wheels trailer, silence-box, control panel, base plate and so on. |
Material Construction and Configuration: |
1. Pump Casing and Cover : Cast Iron GG25 ; Ductile Cast Iron GGG40 ; Bronze
2. Pump Impeller : Cast Iron GG25 ; Ductile Cast Iron GGG40 ; SS304 316 316L; Bronze
3. Shaft : Carbon steel AISI1045 ; Chrome Steel 40Cr ; SS AISI420 ; SS AISI4140 ; SS316Ti ; SS DIN1.4571 ; Duplex SS UNS S32205
4. Seal Type : Mechanical seal , Gland Packing.
5. Bearing Type : Ball Rolling
6. Shaft Sleeve : Cast Steel ; SS304 316316L; Duplex SS CD4-MCu ;
7. Flange Standard : ISO , DIN
Technical Advantage: |
1. T series self-priming pumps are designed for economical & trouble-free operation in handling solids-laden liquids and slurries.
2. T Series pumps are designed for economical & trouble-free operation in handling solids-laden liquids and slurries. Pumps feature a large volute design which allows them to re-prime automatically in a completely open system without the need of suction or discharge check valves. And this is workable with the pump only partially filled with liquid and completely dry suction line.
3. Pumps will be able to handle up to 75mm spherical solids, depending on pump models. In case that pump shaft or bearings need service or repair, the entire rotating assembly can be removed without disturbing pump casing or pipelines.
4. Rotating assembly is sealed with an O-Ring, allowing for external adjustments of clearance

Contact Us
Add:No.25,Lane 7488,Hutai Road,Shanghai,China.
Tel:+86-21-5653 1900
Cell Phone: +86-13501896165
Fax:+86-21-3997 1375
Email:info@pacificpumpgroup.com
Follow Us

Copyright Shanghai Pacific Pump Manufacture (Group) Co.,Ltd © All rights reserved 沪ICP备05058624号-1