Vertical Inline Monoblock Centrifugal  Pump

1. Capacity : up to 2500m3/h  

2. Head : up to160m

3. Speed : up to 3600rpm

4. Power : up to 250kw

5. Voltage : 220V to 690V

6. Temperature range : Within 120 Deg C

· Max working pressure is less than 1.6MPa, which refers to the inlet pressure and the outlet pressure all together is less than 1.6MPa.

· Proper medium: clear water without solid particles or the solid particle content is no more than 0.1% of the water and diameter is less than 0.2mm

· The environment temperature should not be higher than 120℃. The relative humidity should not be more than 95%.

1. Pump Casing and Cover : Cast Iron GG25 ; Ductile Cast Iron GGG40 ; Cast Steel ; SS304 316 316L; 

2.Pump Impeller : Cast Iron GG25 ; Ductile Cast Iron GGG40 ; Cast Steel ; SS304 316316L;  Bronze

3. Shaft : Carbon steel AISI1045 ; Chrome Steel 40Cr ; SS AISI420 ; SS AISI4140 ; SS316Ti ; SS DIN1.4571 ; 

4. Seal Type : Mechanical seal

5. Bearing Type : Ball Rolling

6. Flange Standard : ISO , DIN 

1. Compact structure, small volume, beautiful outlook. The lower barycenter of the vertical structure which co-insides with the center of the pump feet strengthens the stability of running and the duration. 

2. Impeller directly mounted on the extended shaft of the motor, short axial dimension, reasonable configuration of pump and motor. 

3. Easy to mount. Because of the same sizes of both inlet and outlet which also locate on the same central line, the pump can be directly mounted on any part of the pipeline just as a valve. (Inline pump type) The motor is covered with a rain-proof cap so that operation can be done outdoors. 

4. Stable running, low noise, high concentricity of components. Bearings of low noise are used for the motor, the impellers are of best dynamic and static balance, no vibration at running. 

5. No leakage. The shaft is mechanically sealed with carbide alloy wearable material, extending the duration 

6. Easy to maintain. Not necessary to remove the pipe line for check-out and maintenance, only to take out the nuts on the pump lid, the motor and the driving components.