JYWQ auto-stirring submersible sewage pump/drainage pump(hereinafter as pump) is made up of motor, mechanical seal, pump and stirring structure. etc. Pump coaxial integrated design, is manufactured based on absorbing domestic and foreign advanced technology and advantages. Because of auto-stirring function, the sewage discharge can be pumped smoothly. At the bottom of the pump chassis, there is a suction water device, which will reun with high speed with the motor to lead the water out of the pump, at the same time, it washes the pond bottom with the speed 10-20m/s.

This kind of pumps can be used as follows: factories and commercial pollution, city sewage treatment, hospital, hotels, drainage systems, water supply installations, municipal engineering, construction sites, exploration, mining, country biogas, agricultural irrigation, domestic waste water, sewage water, feces and urine, short fiber paper and sand.

The pump can work properly and continuously under following operational conditions:

1. Medium is not corrosive. Sand contents should be max.20% by volume.

2. Medium temperature shouldn't be over 40°C and PH should be 4~10.

3. The pumps should be operated within rated head.

4. The pumps should be fully submerged into water with depth of less that 3m and max. 5m. The pump should be min.0.5m over the water bottom and not be inserted into sludge.

5. Power frequency should be 50Hz, three-phase voltage 380v, and voltage fluctuation should be 0.9~1.1 times than the rated.

1. 100% copper wire cable

2. Chrome-plated pump rotor (more resistant to wear and corrode)

3. Thermal protector

4. High-end bearing and mechanical seal

5. Flange or Elbow for the water outlet

6. Available for 50HZ and 60HZ

Workshop Show