Product Range
Double Suction Split Case Pump
Performance : (50HZ & 60HZ)
Flow:up to 20000m³/h
Head:up to 250m
Speed:up to 3600rpm
Temp.:up to 200 Deg C
Calibre:up to 1200mm
Particle:up to 80mg/L
Pressure:up to 25bar
1 item add to inquiry basket.
Enter Inqulry Basket now.
This item was already in your inquiry basket.
check your Inquiry Basket now.
-
TPOW Part1
- Description
- Make an Inquiry
Construction:
Design Standard:GB , DIN2455 , ANSI
Flange Standard:GB , DIN2501 , ISO7005.2 , ANSI B16.5 Class 150lb
Impeller Type:Double Suction Closed
Seal Type: Mechanical Seal or Gland Packing
Material:
Materials of components
Names of materials
Trademarks of materials
Casing
Gray cast iron
Ductile cast iron
Cast steel
Stainless steel
Duplex steel
HT250/GG25/A278
QT400-18
ZG230-450/SCS5/A216/WCB
SUS304/SUS316/SUS316L
2205
Impeller
Gray cast iron
Cast steel
Brass
Bronze
Silicon brass
Stainless steel
Duplex steel
HT250
ZG230-450/SCS5/A216/WCB
ZCuSn10Pb1
ZCuZn16Si4
ZGOCr18Ni12Mo2Ti
SUS304/SUS316/SUS316L
2205
Shaft
Stainless steel
Cast steel
Duplex steel
SUS420/SUS304/
ZG230-450/SCS5/A216/WCB
2205
Shaft sleeve
Cast iron
Stainless steel
HT200/HT250
SUS304/SUS316/SUS316L
Casing/impeller wear ring
Gray cast iron
Cast steel
Bronze
brass
Stainless steel
Duplex steel
HT250
ZG230-450/SCS5/A216/WCB
ZCuSn5Pb5Zn51
ZCuZn16Si4
SUS304/SUS316/SUS316L
2205
Lantern ring
Gray cast iron
Cast steel
Stainless steel
Duplex steel
Bronze
Brass
HT250
ZG230-450/SCS5/A216/WCB
SUS304/SUS316/SUS316L
2205
ZCuSn5Pb5Zn51
ZCuZn16Si4
Gland
Gray cast iron
Cast steel
Brass
Bronze
Stainless steel
Duplex steel
HT250
ZG230-450/SCS5/A216/WCB
ZCuSn5Pb5Zn51
ZCuZn16Si4
SUS304/SUS316/SUS316L
2205
coupling
Cast iron
HT250
Pump Features:
1. Type TPOW pumps work stably with less noise and vibration and can work at a lifting speed due to. Short Support at both sides, thus they can be widely used.
2. The pipelines arrangement of type TPOW pump looks simple and beautiful due to inlet and outlet at a Same center line.
3. The same rotor of type TPOW pumps can be operated at reverse direction to avoid damage to the pumps By water hammer.
4. Unique design of type TPOW pumps working at high temperature using middle support to fasten the Pump casing and using cooling seals oil lubrication bearing then pump suitable for working at 200 degree Especially for supplying heated water to pipe net system.
5. Type TPOW pump casting parts can be vertically or horizontally mounted according to different working Condition, with mechanical seals or packing seals.
6. Type TPOW pumps look beautiful with visible lines adopting industrially designing.
COST ADVANTAGE:
1. The efficiency of TPOW pumps are 2%~3% higher than the same type pumps due to adopting advanced Hydraulic model and thus minimum the operating costs.
2. The NPSH of type TPOW pumps are 1-3 meters lower than the same type split pumps due to using Advanced hydraulic model and advanced manufacturing technique and thus minimize the foundation costs And extending the using life.
3. Type TPOW pumps are suitable for any site working condition due to using SKF NSK bearing and other Parts chosen by the customers and thus minimize the maintenance costs.
MAINTENANCE ADVANTAGE:
1. It is very easy and simple to replace the mechanical seal due to use container type mechanical seal.
2. It is rapid easy to assembly and dismount the rotor parts due to use elastic ripess assembling.
3. It is unnecessary to make adjustment when assembling
Application:
TPOW series Split Case Pump is widely used for water plant, irrigation, drainage pumping station, power station, water circulation of air-conditioning, industrial water supply system, fire system and shipping industry as well as for the general purpose in the oil refining industry.
Pictures show: